Squealing is a reason to stop and investigate, especially when it is accompanied by heat or a burning smell. Adding a spray or tightening everything is not a reliable diagnosis.
Note when the noise occurs
Record whether it happens when engaging the blades, travelling, turning or cutting under load. Note any recent belt change or impact. This helps distinguish the affected drive system without needing to observe exposed moving components.
Inspect after isolation
Follow the manual to make the mower safe, then examine the belt for glazing, contamination and damage. Check accessible pulley surfaces and obvious obstructions. Oil or debris can affect belt contact; any leak or rubbing point needs attention as well as the belt.
Check fitment and tensioning
An incorrect belt, routing error or faulty tensioner can contribute to noise. Use the specified adjustment procedure where one exists. Do not compensate with a different belt length, altered spring or arbitrary deflection measurement.
Avoid masking the fault
Do not apply oil, grease or belt dressing as a cure. Restore the drive to its specified condition and refit guards before testing. If the noise returns or bearings appear damaged, have the mower inspected rather than continuing under load.
Common question
Can a new belt squeal?
Yes. Check specification, routing and the condition of the drive; newness does not rule out an installation or mechanical problem.
Find the right replacement
Use the confirmed machine and part details to narrow your search. Check the individual listing before ordering.